2.3.15.2 Edit settings (For I>1, IEC or IEEE Curves are selected)
2.3.15.3 Edit settings (For I>1, DT i.e. Definite Time is selected)
2.3.16 GROUP 1 - Under Current Protection SUB MENU
2.3.16.1 Edit settings (if I< Status is set as Disabled)
2.3.16.2 Edit Settings (if I< Status is set as Enabled)
2.3.17 GROUP 2 MENU
2.3.17.1 Edit settings
2.3.18 SYSTEM DATA MENU
2.3.18.1 Edit settings
2.3.18.2 View settings
2.3.19 VIEW RECORDS MENU
2.3.19.1 View contents
2.3.19.2 View Error Log
2.4 Configuration flowcharts
2.4.1 Main Menu
2.4.2 View Measurement menu
2.4.3 Edit / View CB Control menu settings
2.4.4 Edit / View Date and Time menu settings
2.4.4.1 Edit Settings
2.4.4.2 View Settings
2.4.5 Edit/View Configuration menu settings
2.4.5.1 Edit Settings
2.4.5.2 View Settings
2.4.6 Edit / View CT and VT Ratios menu settings
2.4.7 Edit/View Record Control menu settings
2.4.8 Edit/View Communication menu settings
2.4.9 Edit/View Group 1 menu settings
2.4.10 Edit/View GROUP 1- SYSTEM CONFIG sub menu settings
2.4.10.1 If 2nd Harmonic is Disabled
2.4.10.2 If 2nd Harmonic is Enabled
2.4.11 Edit/View Group 1- Overcurrent sub menu settings
2.4.11.1 If I>1 Function is Disabled
2.4.11.2 For I>1 Function set for IEC curves
2.4.11.3 If I>1 Function set for IEEE curves
2.4.11.4 If I>1 Function set for Definite Time
2.4.12 Edit/View Group 1- Earth Fault sub menu settings
2.4.12.1 If IN>1 Function is Disabled
2.4.12.2 If IN>1 Function is set for IEC curves
2.4.12.3 If IN>1 Function is set for IEEE curves
2.4.12.4 If IN>1 Function is set for Definite Time
2.4.13 Edit/View Group 1-Thermal Overload sub menu setting
2.4.13.1 If the Characteristic is set to Disabled
2.4.13.2 If the Characteristic is set to Single
2.4.14 Edit/View Group 1-Cold Load Pickup sub menu settings
2.4.14.1 Set Cold Load Pick Up Protection Menu:
2.4.14.2 Edit/View Cold Load Pickup - I>1 sub menu settings
2.4.15 Edit/View Group 1-Undercurr Prot. Sub menu settings
2.4.15.1 If I< Status is set to Disabled
2.4.15.2 If I< Status is set to Enabled
2.4.16 Edit/View Group 2 menu settings
2.4.17 Edit/View System Data menu settings
2.4.17.1 Edit settings
2.4.17.2 View Settings
To Next Page
Loading...
