Alstom MiCOM P50 Agile P15D - Page 52

5 Configuration
P50 Agile P15D
5-16
P15D/EN TM/B
Password = 0000
Press the Edit Key, the number will start blinking.
Enter the previously set password by using the Plus / Up arrow key (+
/) or the Minus / Right arrow key (- /). The Password setting range
is 0000 to 9999. The Default Password is “0000”
After editing the Password press the Edit Key, the number will stop
blinking.
Press the Left arrow key () to move to the next option.
Local Time Enable
Fixed
Press the Edit Key the text will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired Local Time Enable can set i.e. Fixed / Flexible /
Disabled.
After selecting the desired Local Time Enable press the Edit Key, the
text will stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *
Local Time Offset
+000 Mins
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired Local Time Offset can be set. The setting range is from
+720 to -720 in steps of 15.
After editing the desired Local Time Offset press the Edit Key, the
number will stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *
DST Enable
Yes
Press the Edit Key, the text will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired DST Enable can set i.e. Yes / No
After selecting the desired DST Enable press the Edit Key, the text will
stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option.*
DST Offset
60 Mins
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired DST Offset can be set. The setting range is from 30 /
60
After editing the desired DST offset press the Edit Key, the number will
stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *
DST Start
Last
Press the Edit Key, the text will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired DST Start can set i.e. First / Second / Third / Fourth /
Last.
After selecting the desired DST Start press the Edit Key, the text will
stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option.*