Alstom MiCOM P50 Agile P15D - Page 76

5 Configuration
P50 Agile P15D
5-40
P15D/EN TM/B
I>1 Time Dial
001.00
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired I>1 Time Dial can be set. The setting range is from
000.01 to 100.00 in steps of 0.01.
After editing the desired I>1 Time Dial press the Edit Key, the number
will stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *
I>1 tRESET
001.00
Press the Edit Key, the number will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired I>1 tRESET can be set. The setting range is from
000.00 to 100.00 in steps of 0.01.
After editing the desired I>1 tReset press the Edit Key, the number will
stop blinking. **
Press the Minus / Right arrow key (- /) to move to the next option. *
I>1 2H Blocking
Enable
Press the Edit Key, the text value will start blinking.
By using the Plus / Up arrow key (+ /) or the Minus / Right arrow key (-
/) the desired I>1 2H Blocking function can set i.e. Enable / Disable.
After selecting the desired I>1 Blocking press the Edit Key, the text will
stop blinking. **
Press the Left arrow key () to move to the next option. *
I>1 Current Set
1.00 A
The window displays the first setting of the Over Current menu.
Press the Left arrow key () to move to the next option. *
SET For Save
RESET For Cancel
Press the SET / Left arrow key () to SAVE the changes.
Press the RESET key to CANCEL the changes.
OK
When the SET / Left arrow key () is pressed the relay will SAVE the
changes and this window will flash for moment. The control will return to
the Main Menu.
GROUP 1