1. Make sure the following items are
included in your package.
Once powered on, you will hear your
speaker audibly say “Powering ON.”
5. To power on your speaker, press and hold the “ ” ON/OFF button for about
8. If your speaker is paired with an iOS device that is capable of running the Siri
audio personal assistant application, you can use your speaker to activate Siri. To
do so, press the power button “ ” 3 times.
two seconds.
Once paired, you will hear your speaker audibly say: “You are now paired, enjoy.”
AC Adapter
USB Cable
AUX Cable
Mount
Item # IMW577
Quick Start Guide
RUGGED BLUETOOTH SPEAKER
3. Charging: When charging, an orange LED light will illuminate. The orange light .
2. Connect the included USB Cable to the included AC Adapter to charge your
speaker’s internal battery. A full charge takes approximately 4 hours.
4. For a look at the various buttons on your speaker, view the graphic below.
2 seconds
6.While audio is playing, press and hold the “ - ”
or
2 seconds
Power on your speaker. Go to the
Bluetooth Manager of your Bluetooth
device. Search Bluetooth devices and
select “LifeJacket2” to start
connecting.
Technical Support
For technical support issues please visit our website at www.alteclansing.com.
You can find manuals, software and FAQ’s at the website. Can’t find what you
are looking for? Call 1-855-292-4087 to access our technical support
information on the phone.
Pair the Speaker Using NFC
With Near Field Communication(NFC), you can
easily pair and connect your speaker to your
compatible device. Just hold your NFC enabled
device directly against the wireless check in spot on
your speaker.
7.You can also use the included 3.5mm Auxiliary Cable
to connect audio devices through the AUX In port on your
speaker.
and “+ ” buttons
simultaneously to disconnect the Bluetooth pairing between your speaker
and your audio source.
Press three times to
activate Siri
To Next Page
Loading...
