Need help?Do you have a question about the Alto Professional TRUESONIC TS112A and is the answer not in the manual?
Power| output power continuous | 400 W |
|---|---|
| output power peak | 800 W |
| power supply | 100-120 V or 200-240 V, 50/60 Hz |
| inrush current at initial switch-on | 6.02 A |
| inrush current after power supply interruption | 4.16 A |
Frequency and Sound| crossover frequency | 2 kHz |
|---|---|
| max SPL at 1m continuous | 122 dB |
| max SPL at 1m peak | 125 dB |
| frequency response | 52 Hz – 18 kHz (@ -10 dB) |
Drivers| low frequency driver | 12" (305 mm) woofer, 2" (51 mm) voice coil |
|---|---|
| high frequency driver | 1" (25 mm) neodymium driver |
| horn coverage | 80/100° H x 60° V nominal |
Ports & Interfaces| input connectors | 1/4" TRS or XLR |
|---|---|
| link connectors | XLR |
| external control | Volume, power on/off with LED, clip limiter with LED, ground lift |
Weight and Dimensions| dimensions | 26" x 15.6" x 15.1" (660 mm x 396 mm x 384 mm) |
|---|---|
| weight | 42.8 lbs (19.4 kg) |
| cabinet material | Polypropylene, trapezoidal |
To Next Page