Need help?Do you have a question about the Alto Professional TX212 and is the answer not in the manual?
Instructions and warnings for safely mounting loudspeakers on stands, emphasizing stability and proper use of equipment.
Information on permissible noise exposure levels and the importance of hearing protection when using high-SPL equipment.
Guidance on adjusting volume for line-level and mic-level audio sources, including signal limit indicators.
Illustrates connecting mixer outputs to two TX2 loudspeakers, with notes on volume and input selector settings.
Demonstrates connecting two TX2 loudspeakers with two extension loudspeakers from a mixer's main outputs.
Details on AC input, fuse, power switch, volume, input/mix out connectors, and signal/limit LED.
Describes features like contour and ground-lift switches, in addition to standard connections and indicators.
Detailed technical specifications for the TX208 loudspeaker, including drivers, amplifier, and dimensions.
Detailed technical specifications for the TX210 loudspeaker, covering system type, power, and physical attributes.
Technical data for the TX212 loudspeaker, including amplifier power, SPL, equalization, and enclosure details.
Comprehensive technical specifications for the TX215 loudspeaker, including frequency response and weight.
General| Woofer Size | 12 inches |
|---|---|
| Crossover Frequency | 2.5 kHz |
| Coverage | 90° x 60° |
| Type | Active Loudspeaker |
| Inputs | XLR, TRS |
| Outputs | XLR |
| Connectors | XLR, TRS |
| Enclosure | Polypropylene |
| Tweeter Size | 1" (25.4 mm) titanium diaphragm HF driver |
To Next Page