Alto-Shaam 1000-BQ2/96 - Page 26

24 MN-29578 • Rev 6 • 04/17 • 1000-BQ2 Banquet Cart
Service
Model > 1000BQ2/96 1000BQ2/128 1000BQ2/192
Item Description Part No. Qty Part No. Qty Part No. Qty
1 Bottom Panel Spot w/Hitch 5015721 1 5015983 1 5015985 1
2 Hitch Receiver Bracket w/Slot 1013824 1 1013824 1 1013824 1
3 Caster, Rigid, 6" (152mm) CS2042 2 CS2042 2 CS2042 2
4 Screw, M8 x 1.25 x 20mm Hex Flg SC-27046 16 SC-27046 16 SC-27046 28
5 Washer, M8, 18-8 WS-22298 12 WS-22298 12 WS-22298 12
6 Washer, M8 Split Lock WS-22303 12 WS-22303 12 WS-22303 12
7 Screw, M8 x 1.25 x 25mm Pan SC-26604 12 SC-26604 12 SC-26604 12
8 Caster, Swivel, 6" (152mm) CS2231 2 CS2231 2 CS2231 4
9 Hitch Pin Receiver Bracket 1013823 1 1013823 1 1013823 1
Part numbers and drawings are subject to change without notice.
1
3
4
2
5
6
7
8
9
Trailer Hitch (factory installed option) - 1000-BQ2/96 Shown
Trailer Hitch Safety
• No more than (3) carts are to be attached to either a
dedicated “golf cart” or bicycle.
• Speed limits should be kept to a maximum of 5mph
(8km/h) to avoid potential employee injury.
• All food being transported should be in pans (covered),
including; 2" deep, 4" deep and sheet pans. Adequate
shelving and interior support structure is required
to both maximize capacity as well as provide stable
transportation and ease of access to loading/unloading
of food products.