To Next PageTo Next Page
Need help?Do you have a question about the Alto EQU MK II Series and is the answer not in the manual?
General| Type | Stereo Equalizer |
|---|---|
| Channels | 2 |
| Boost/Cut Range | ±12dB |
| Power Supply | 100-240VAC, 50/60Hz |
| Frequency Response | 20Hz - 20kHz (+0/-0.5dB) |
| Total Harmonic Distortion | <0.005% @ +4dBu, 1kHz |
Explains hazard symbols, warnings, and cautions for safe operation.
Covers power supply, connections, cleaning, servicing, and environmental considerations.
Thanks the customer and explains ALTO's passion and commitment to quality.
Outlines ALTO's R&D, DSP technology, and dedication to customer satisfaction.
Introduces the series of graphic equalizers and their capabilities.
Lists the main features of the graphic equalizers.
Details front panel layout, functions, and explanations of specific controls.
Diagrams and details for rear panels, connectors, and power switch for all models.
Ensures correct supply voltage setting before plugging in the power cord.
Details wiring configurations for balanced/unbalanced connections using TRS, XLR, and RCA.
Provides typical frequency ranges for instruments and voices for sound characterization.
Explains use in PA systems for hum elimination, sound shaping, and effects.
Details types, slider travel, input/output connections, impedance, and filters.
Lists frequency response, THD, S/N ratio, power supply, consumption, and dimensions.
Instructions for obtaining warranty service, registration card, and return procedures.
Outlines warranty coverage, exclusions, and limitations for the product.
