Need help?Do you have a question about the Alto MS Series and is the answer not in the manual?
General| LF Driver | 8" woofer |
|---|---|
| HF Driver | 1" compression driver |
| Power Output | 100W RMS |
| Outputs | 1 x XLR |
| Features | Bluetooth, USB playback, Rechargeable battery |
| Weight | 5.8 kg |
| Inputs | 2 x XLR-1/4" combo, 1 x 3.5mm stereo |
Follow operating instructions, avoid water, heat, and liquid entry for safe use.
Only qualified personnel should service; inspect package for damage upon receipt.
Beware of hearing loss from high volume; follow specific installation requirements.
Connect and power up passive full-range speakers using mixer and stereo amplifier.
Connect and power up passive subwoofer and satellite speakers with mixer and amplifier.
Details INPUT and THRU connections for passive full-range and subwoofer speakers.
Front panel controls (Gain, Clip LED, Presets) and rear panel connections (AC Inlet, Output, Input).
Explains use of power connectors and terminals for MS series cabinets.
Recommends shielded twisted pair for ALTO MS1 speaker modeller connections.
Detailed specs for MS12, MS15, MS152, MS153, MS154 models.
Detailed specs for MS15S and MS18S subwoofer models.
Detailed audio input, output, system specs, and power for ALTO MS1 modeller.
To Next Page