Need help?Do you have a question about the Altocraft 241-9902 and is the answer not in the manual?
Keep the work area clean and consider the environment, ensuring proper lighting and avoiding hazards.
Dress properly, wear eye protection, secure the workpiece, and maintain balance during operation.
Use the right tool, do not force the drill, maintain tools, remove keys, and avoid unintentional starting.
Check for damaged parts, stay alert, and guard against electric shock when using the tool.
Use only identical replacement parts for servicing the tool to ensure safety and performance.
Charge battery at room temperature, avoid damaged chargers, prevent short circuits, and do not incinerate.
Identifies the parts of the worklight, including swivel head and handle.
Lists and describes the main parts of the cordless drill, such as the chuck and trigger.
How to adjust drill speed by modulating the trigger and change the rotation direction.
Set the torque for driving screws to prevent stripping or ensure desired depth.
Instructions for opening and closing the chuck to secure drill bits.
How to turn the spotlight on/off, adjust its angle, and replace the bulb.
Details on charging the battery pack, charger indicators, and charging times.
Information on battery discharge, lifespan after cycles, and avoiding charging hot batteries.
Clean tools with a damp cloth; avoid solvents. Lubrication is generally not required.
Step-by-step guide to remove and install a new drill chuck.
Maintain NiCd battery performance by managing heat, charge cycles, and occasional full discharge.
To Next Page
General