What to do if my Alton ECOMAX EM18191P loses suction during dry pick-up?
If your Alton Vacuum Cleaner loses suction during dry pick-up, there are several possible causes. First, the tank might be full, so you should drain and clean it. Second, the hose could be clogged; remove the hose and clear any debris. Finally, the filter may be clogged, so clean or replace it.
What to do if my Alton ECOMAX EM18191P loses suction during wet pick-up?
If you experience a loss of suction during wet pick-up with your Alton Vacuum Cleaner, consider these possibilities: 1. The tank may be full, in which case you should drain and clean it. 2. The hose might be clogged. Remove it and clear any obstructions. 3. The filter could be clogged. Try cleaning or replacing it.
Provides essential additional safety rules for operating the appliance.
Guidelines for servicing double-insulated wet/dry vacuums, emphasizing care and knowledge.
Detailed instructions for assembling the casters onto the vacuum cleaner.
Steps for correctly installing a disposable filter bag for dry debris collection.
Instructions for installing the cartridge filter for both dry and wet pick-up.
Procedures for removing and cleaning the cartridge filter after wet pick-up.
Steps on how to clean the cartridge filter for optimal performance.
General| Brand | Alton |
|---|---|
| Model | ECOMAX EM18191P |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page