Overview:
Altronix AL400UL power supply converts a 115VAC, 60Hz input to a 12VDC or 24VDC power-limited output
(see specifications). AL400UL is UL Listed for fire alarm, burglar alarm, and access control applications.
Agency Listings:
UL 294 Access Control System Units.
UL 603 Power Supplies for Use with Burglar-Alarm Systems.
UL 1069 Hospital Signaling and Nurse Call Equipment.
UL 1481 Fire Protective Signaling Systems.
MEA - NYC Department of Buildings Approved.
CSFM - California State Fire Marshal Approved.
NFPA 72 compliant
Features:
AL400UL
UL Listed, Multi-Agency Approved Power Supply/Charger
Altronix Corp.
140 58th St. Brooklyn, NY
Input:
• Input 115VAC, 60Hz, 1.425A.
Output:
• 12VDC or 24VDC selectable output.
• 12VDC @ 4A or 24VDC @ 3A supply current.
• Class 2 Rated power-limited output.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
Battery Backup:
• Battery leads included.
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 1.2A.
Visual Indicators:
• AC input and DC output LED indicators.
Enclosure Dimensions (H x W x D approx.):
12.25” x 7.25” x 4.5”
(311.2mm x 184.2mm x 114.3mm)
Power Supply Voltage Output Selections:
Output Switch Position
12VDC SW1, 2 - ON, SW3, 4 - OFF
24VDC SW1, 2 - OFF, SW3, 4 - ON
Stand-by Specifications:
Output
4 hr. of Stand-by and
5 Minutes of Alarm
24 hr. of Stand-by and
5 Minutes of Alarm
60 hr. of Stand-by and
5 Minutes of Alarm
12VDC / 40AH Battery
Stand-by = 4.0A
Alarm = 4.0A
Stand-by = 1.0A
Alarm = 4.0A
Stand-by = 300mA
Alarm = 4.0A
24VDC / 12AH Battery –
Stand-by = 200mA
Alarm = 3.0A
–
24VDC / 40AH Battery
Stand-by = 3.0A
Alarm = 3.0A
Stand-by = 1.0A
Alarm = 3.0A
Stand-by = 300mA
Alarm = 3.0A
To Next Page
Need help?
General
