14 / 57 TR
Television / User Manual
OVERVIEW
--------------------------------------------------------------------------------------------------------------
Buttons of the remote control
7
VOL+: Volume up.
7
VOL-: Volume down.
7
CH : Channel up.
7
CH : Channel down.
7
8: Turns on the television in the stand-by
mode and switches it to the stand-by mode.
Turning on the television and
switching it to standby mode
1 Press “8“to turn on the television in the
stand-by mode.
2 Press “
8“ to switch the television to stand-
by mode.
Adjusting the volume
1 Use “VOL+“ to increase the volume.
2 Use “VOL-“ to decrease the volume.
Changing the channel
1 Press “CH “ to go to the next channel.
2 Press “CH
“ to go down to the previ-
ous channel.
7
U: Headphone jack or external audio output.
7
USB: USB socket for data media.
7
CI: For CA modules for receiving scramble
channels.
7
MINI YPbPr IN: Component, audio/vid-
eo inlet and outlet (3.5mm jack - with YPbPr
converter cable).
7
COAX: Coaxial audio output.
7
HDMI2: Input for digital audio and image
data.
7
HDMI1: Input for digital audio and image
data.
7
RF IN-C/T2: For antenna cable (terrestrial
antenna or cable connection).
7
RF IN-S2: Satellite antenna input.
7
CVBS (V/L/R):Audio/video input for
camera.
7
PC AUDIO IN: Audio signal input for PC.
7
VGA IN: Image signal input for PC.
To Next Page
Loading...
