Pro Tips
3M™ VHB™ Tape works great if the surface is properly prepared and rm pressure is
applied for over 10 seconds.
Surface Preparation
• Clean the surface
• Ensure the mounting surface temperature is above 50 °F
Wireless performance is optimized when mounted near the top of the door in a vertical
orientation.
OK BESTWRONG
Wire an external contact by securing one wire to either the external 1 or external 2 port
and the other wire to the common port. If both external contacts are used two wires
will be inserted into the common port.
Battery
-
+
Cover Tamper
Magnetic Reed Switch
External 1
Terminal
External 2
Terminal
Center Common
Terminal
Tamper
To Next Page
Loading...
