Symptom Status Possible Solution
Blue LED blinks slowly Not enrolled Enroll siren into the panel
Blue LED is off Loss of AC Power to
panel
Ensure panel is plugged in
Orange LED is on Cover tamper on siren
is open
Close the siren’s cover
Orange LED is on Loss of AC power to
siren
Ensure the siren is
plugged into the outlet
Orange LED is on Trouble condition
somewhere on the
system
Enter the dealer portal
and check the specic
trouble condition
Red LED is on Panel is armed
Blue LED is on System is okay
Blue LED blinks
quickly
Siren is receiving
transmissions from the
panel
Green LED blinks Zone is open on panel
Hardware Layout
Troubleshooting
Tamper Switch
Orange/Blue LED
Green/Red LED
To Next Page
Loading...