Alula RE616 User Manual

The RE616 Wireless Siren is an auditory warning device
that produces high volume warning sounds and low volume
notication sounds.
Features
• Siren cadence synchronized to panel
• 85 dBA minimum at 1m
• LEDs follow arming status and trouble conditions from
panel
• 5-year warranty
Sounds a high volume warning for burglary, smoke and carbon
monoxide alarm conditions. Low volume notication sounds
are made for auxiliary alarm, status, and trouble conditions.
The siren will tamper when the cover is opened. The siren
will follow the panel’s alarm pattern and will chime when
the panel chimes. Status beeps and volume are adjustable
through the Connect+ Installer application, or through the
interactive service provider’s web portal.
Enroll by placing the panel into wireless enrollment mode
and then pulling the battery tab, or by inserting the battery.
The panel will beep to indicate when the siren has been
enrolled. The panel supports up to eight RE616 sirens
at one time. After enrolling the siren, take the panel out
of wireless enrollment mode. Close the battery cover.
The blue LED should be solid when the siren is enrolled
successfully.
• Once the siren is properly enrolled, test
functionality in a desired location.
To replace the batteries, pull the battery cover off the front
of the siren to expose the battery compartment.
Optional screw mounting can be done by securing the
siren to a surface with the outlet plate mounting screw.
Use the panel installation guide to verify proper system setup.
RE616 Wireless Siren
Connect+
™
Encrypted
I
N
S
T
A
L
L
G
U
I
D
E
I

Alula RE616 Specifications

General

Brand	Alula
Model	RE616
Category	Marine Equipment
Language	English

Summary

Alula RE616 Wireless Siren Overview

Product Features

Highlights key characteristics like synchronized cadence, sound output, LED indicators, and warranty.

Sound Functionality

Describes warning and notification sounds, tamper detection, and adjustability via software.

Wireless Enrollment Process

Step-by-step guide to enroll the siren with the panel, including enrollment limits.

Battery Replacement Procedure

Instructions for accessing and replacing the siren's batteries.

Optional Mounting Method

Details on securing the siren to a surface using its mounting screw.

Troubleshooting and Hardware

Siren Troubleshooting Guide

Table of common siren issues, their status indicators, and potential solutions.

Hardware Component Identification

Diagram showing the location of LEDs, tamper switch, and battery compartment.

Product Specifications and Compliance

Physical and Environmental Specs

Details housing dimensions, weight, mounting hardware, operating temperature, and humidity.

Sensor and Electrical Specifications

Covers frequency, battery, sounder loudness, pulse times, and electrical connection.

Certification Details

Lists the RE616 model certification with FCC and IC identifiers.

Warranty and Trademarks

Information on product warranty and registered trademarks.

Regulatory Compliance Notices

Presents FCC and Industry Canada compliance statements and conditions for operation.