Package Contents
Product Highlights Button Operation
Device Operation
Device Operation
qsg Q10546 Copyright © 2020 Aluratek, Inc. All Rights Reserved.
model ABH05F
Quick Start Guide
Bluetooth Wireless Stereo
Headphones
Charging the battery
The battery is not fully charged and it is highly recommended that you charge
ABH05F before you begin using it.
Note: Using ABH05F “out of the box” will not harm the device. You will experience reduced battery life
as the unit will not be fully charged.
Connect the larger USB end of the provided cable to your computer / power
adapter (not included). Connect the smaller micro USB end to the USB port of
ABH05F. Please charge the battery for a minimum of 3 hours. The red LED will be
on while charging. When charging is complete, the blue LED will turn ON.
Device Operation
3.5mm music line-in function
Connect the audio line-in 3.5mm cable to 3.5 audio jack for wired music.
1. Connect the 3.5 audio wire to the headphone and audio player.
2. You can adjust the volume from the connected audio player or mobile phone.
Note: Phone function cannot be used in this mode
Button Operation
Note: The pairing mode will last 10 minutes. ABH05F will power off automatically if no devices can be
connected within 10 minutes.
Pairing with an iPhone, smartphone or tablet:
The pairing procedure will vary depending on the actual device. Please refer to the
user guide of your device for detail instruction. The pairing procedures are as follows:
1. Make sure ABH05F is powered OFF.
2. To activate the headphone pairing mode, power on ABH05F, it will enter pairing
mode automatically. (Red and Blue LED will flash rapidly)
3. Activate your device’s Bluetooth function and set your device to search for
Bluetooth devices. Select ABCTVKITH when it is found.
4. For transmitter with Bluetooth version 2.1, you will not need to input a code.
If you are prompted for PIN, please enter “0000”.
5. If prompted by your device to connect, please select “Yes”.
6. After connecting successfully, the blue LED will flash once every 10 seconds.
Note: Please make sure the audio output is set to Bluetooth for audio streaming from the device.
USB Cable 3.5 mm Cable
Your order has been carefully packaged and inspected. The following accessories should be included in your package. Please
inspect the contents of the package to ensure that you have received all items and that nothing has been damaged. If you
discover a problem, please contact us immediately for assistance.
Microphone
Answer Call / End Call /
Play / Pause
Multifunction Button
Micro USB
Charging Port
3.5mm (AUX)
LINE IN Port
Bluetooth
Status LED
ON / OFF
Volume Control
Volume Adjust: Press the or buttons to adjust the volume.
Play/Pause: Short press the button to play and pause music.
Previous: Long press the button for 2 seconds to return to
the previous music track.
Next: Long press the button for 2 seconds to advance to the
next music track.
Answer Call: Short press the button to answer phone calls.
End call: Short press the button to end the phone call.
Reject call: Press and hold the button for 2 seconds to reject a call.
Last number redial: In standby status, press the button twice to redial the
last number.
Battery Capacity status: When the headphones are connected to an iOS
device, the headphone battery power status is visible in the upper right corner.
To Next Page
Need help?
General
Weight and Dimensions
