What to do if Alutech Targo TR-3531-230E Industrial Equipment door stops, but the drive continues to operate?
If the door stops, but the drive continues to operate, it could be due to an obstruction in the path of the door movement or incorrect drive adjustment. Remove any obstructions and check the adjustments of the final positions.
How to fix Alutech Targo TR-3531-230E Industrial Equipment door that does not stop at required final positions?
If the door does not stop at the required final positions, it's likely that the final positions are not adjusted or have changed. You should adjust the final positions.
Why Alutech Targo TR-3531-230E Industrial Equipment drive does not work?
If the drive does not work, it could be due to several reasons. First, check the supply voltage and ensure the wires on the terminals are clamped properly. Second, the drive might be unlocked or the emergency manual control chain could be activated. Lock the drive and check the operation of the emergency manual control chain.
What to do if Alutech Targo TR-3531-230E Industrial Equipment drive suddenly stops during door movement?
If the drive suddenly stops during door movement, the thermal protection of the drive motor may have tripped. Allow the drive motor to cool down.
Why does Alutech Industrial Equipment door move in the wrong direction?
If the door moves in the wrong direction, it means that the correct direction of the door's movement has not been checked. Make the correct adjustment of the control unit.
General| Brand | Alutech |
|---|---|
| Model | Targo TR-3531-230E |
| Category | Industrial Equipment |
| Language | English |
To Next Page