EasyManua.ls Logo

Alva CCR108 - Leak Test Procedure; Performing the Leak Test; Leak Test Safety Precautions

Alva CCR108
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LEAK TEST
Theleaktestmustbecarriedoutinawell-ventilatedarea,free
fromanyamesorothersourcesofignition.
• Withthecartridgeinstalled
inthestove.Opentheignitor
knob.
• Brushtheconnections(stove
tocartridge)withasolutionof
equalpartssoapandwater
(makesureit’sfoamy).
• Astreamofbubblesforming
indicatesagasleak.(See
Fig.A)
• Ifbubblesappear,turntheigni-
tionknobOFF,‘O’,(clockwise)
andreleasethecartridgelock
levertotheupwardposition
andremoveandisolatethe
gascartridge.
• Re-installthegascartridge,
makingsurethecartridgeslot
ispointingupwardandretry
theleaktest..
• Ifyouareunsureorifyou
cannotinstallthecartridge
withoutaleakoccuringplace
thebutanecartridgeoutsidein
acool,well-ventilatedareaand
contactAlvaon086 100 ALVA
(2582).
• Aleakbetweenthestoveand
canistercanleadtoare,
whichisverydangerousand
canresultinextensiveinjuryor
evendeath.
Fig.A
Foamy
bubbles
indicate a
leak
Connection
in assembly
Connections to be leak tested
Cartridge to heater
3
PRECAUTIONS
Leak test all
connections after each
canister installation.
NEVER check for
leaks with a match or
open ame
Any Butane cartridge
not connected for use
must not be stored in
the vicinity of this or
any other appliance.

Related product manuals