ALZA MOES ZigBee AM43 - Page 12

12
Restoring Factory Settings: Motor Automatically Exits
Programming Mode After 30 Seconds of Inactivity. Note:
Restoring to Factory Settings Will Delete All Previous
Customizations.
Press the settings button for
three seconds.
Blue indicator will flash three
times.
The motor now stores
the bottom limit setting.
Press the settings button for three
seconds to enter the programable mode.
Indicator will turn
red.
Press the settings button for seven
seconds.
Blue indicator will flash quickly
three times.
The motor now restores
to factory settings.