17
Issue: Motor Suddenly Stops Working
Possible Causes:
A. Power outage.
B. Motor activates overload protection due to excessive load.
Solution:
A. Charge the motor to ensure it has adequate power supply.
B. Examine if the motor is overloaded or stuck, rectify the issue.
Issue: Motor Doesn't Work While Charging
Possible Cause: Charger plugged into the sensor connection port.
Solution: Ensure the charger is connected to the designated charger port.
Additional Tips: Be vigilant and avoid confusion between the 8,4 VDC charger port and
the sensor connection port during troubleshooting. Careful attention to these details
can prevent errors.
To Next Page
