AM.PM BLISS - Post-Assembly Usage Advisory; Shower Enclosure Cleaning and Maintenance

4
5
- install waterproof sealer, handle magnet sealer
onto the door:
- seal the connection lines of the proles and a tray.
ATTENTION! AfTER THE ASSEMBLY SOME TIME SHOULD BE gIVEN fOR THE SEALER
TO HARDEN. IT IS pROHIBITED TO USE THE pRODUCT DURINg 24 HOURS AfTER THE
fINISHINg Of THE INSTALLATION WORkS.
3. CLEANINg AND MAINTENANCE Of THE SHOWER ENCLOSURE
- For cleaning of the shower enclosure use soft detergents and soap.
- Do not use aggressive detergents for cleaning of the shower enclosure.
- Strong contaminations at the shower enclosure surface are recommended to be treated by diluted vinegar and
then to rinse with water.
%&
MONTAgEANLEITUNg fÜR DIE DUSCHECkE BLISS SLIDE
1. BESTÜCkUNg
1. Wandanbauprol – 2 St.
2. Stoßstellenprol – 2 St.
3. Befestigung der fest integrierbaren
Glasscheibe – 8 St.
4. Dichtung des fest integrierbaren
Glasstreifens – 2 St.
5. Zierelement – 4 St.
6. das obere Führungsprol – 1 St.
7. Laufrolle – 4 St.
8. Dichtung der festintegrierbaren breiten
Glasscheibe – 2 St.
9. Zierelemente der Befestigungen von
festintegrierbaren Glasscheiben – 8 St.