Option B
Insert short lag screws [B] into wall anchors [C], tighten short lag screws [B] until the
they are pulled firmly against the metal fames.
Position the metal frame with floating shelf [01] at your desired height and make sure
the metal frame with shelf [01] is level and flush to the solid concrete and concrete
block walls. Mark the holes for the wall anchors [D].
Step 2C For
Solid Concrete and Concrete Block Walls
6
B
Note:
The floating shelf will be
easier to falling off for pulling
tension if you install the
floating shelf up side down
To Next Page
Loading...
