Amada MM-315B - User Manual

S09M0834E-15
OPERATION MANUAL
Original instructions
WELD TESTER
MM-315B

Summary

1. Special Notes

1.1 Safety Precautions and Hazard Symbols

Discusses hazard signs (DANGER, WARNING, CAUTION) and their meanings for safe operation.

4. Names and Functions of Parts of the Weld Tester

5. Measurement

5.1 Toroidal Coil Setup for Measurement

Guides on attaching and connecting the toroidal coil, essential for current measurement.

5.2 Supplying Power

Explains the procedure for turning on the unit and understanding the initial display.

5.4 Range Setting

Details how to select the appropriate measurement range (Lo or Hi) for accurate readings.

5.5 Impulse No. Setting

Covers setting the number of weld impulses to be monitored and measured.

5.6 Setting of the First Cycle

5.7 Setting of the Last Cycle

5.8 Checking Conduction Degrees

5.9 Current Measurement of Frequency-Inverter Welders

5.12 Forced Measurement Cycle

6. Button and Functions

6.1 Forced Measurement Cycle Setting

6.2 Current Trigger Level Setting

7. Specifications

9. Charging the Battery

9.1 Connecting Unit and Charger for Battery Charging

Step-by-step instructions for connecting the charger and initiating the battery charging process.

9.5 Replacing the Nickel-Hydrogen Batteries

10. Calibration

Amada MM-315B Specifications

General

Brand	Amada
Model	MM-315B
Category	Test Equipment
Language	English