Amana A33 - Remove Existing Disposer; Shock Hazard

4
If you are replacing an
existing disposer, continue to
Step 2.
If there is no existing disposer,
disconnect sink drain and
skip to Step 9.
1
SHOCK HAZARD
Turn off electric power at circuit
breaker or fuse box.
WARNING
Remove existing disposer
2
Falling Hazard
WARNING
3
4
Turn off electrical power at circuit breaker
or fuse box. Disconnect drain trap from
waste discharge tube. Disconnect
dishwasher if connected to the disposer.
While supporting disposer, insert of a 1/4”
allen wrench or screwdriver into right side
of mounting lug, and turn. Disposer will
fall free.
Flip disposer over and remove electrical
cover plate.