Amateur UV82 User Manual

List of available accessories for the transceiver.

Instructions for correctly attaching the radio's antenna.

Guide on how to attach the belt clip to the transceiver.

Steps for connecting an external micro-headset to the transceiver.

Procedure for properly inserting and securing the battery pack.

Guidance for the first-time charging and use of a new battery.

Advice on proper handling and maintenance of the battery.

Methods to extend the operational lifespan of the battery.

Recommendations for storing the battery to maintain its capacity.

Identification of major parts, controls, and keys on the radio.

Explanations of radio commands, keypad functions, and key definitions.

Details on the accessory jack for connecting external devices.

Instructions for turning the radio on/off and adjusting volume.

Method for choosing desired frequencies or memory channels.

Guide to navigating and operating through the radio's shortcut menus.

Explanation of the squelch function for noise muting and its setting.

How to use the voice-activated transmission feature.

Guidance on selecting transmission bandwidth for clarity.

Functionality for monitoring two frequencies simultaneously.

How to set a timer to limit transmission duration.

Settings for how scanning resumes after detecting a signal.

Functionality to transmit identification codes via PTT.

Prevents transmission on an occupied channel.

Setting the direction for frequency shift when using repeaters.

Defining the frequency offset for repeater access.

Function to eliminate the tail tone at the end of transmissions.

Step-by-step guide for saving radio channel data.

Process for scanning and setting CTCSS/DCS codes.

Information on using repeater tail tones for communication.

Reference table for Continuous Tone-Coded Squelch System codes.

Reference table for Digital-Coded Squelch codes.