1. Go to the Body score tab on the app home page.
2. Tap in the upper right corner to claim and re-alloca te the weight data.
3. The re-allocated data is saved to the corresponding user data.
Unpairing
After unpairing, the Amazfit Smart Scale is deleted from your account, and the app can no longer
obtain your body data from the scale. Data that is not synchronized to the app before unpairing
will be lost. To unpair Amazfit Smart Scale from your phone, perform the following steps:
1. Step on the scale gently to light up the screen. Place your phone close to the scale, launch the
app, and ensure that the app has been connected to the scale.
2. Select Profile > My devices > Amazfit Smart Scale.
3. Tap Unpair, and complete other operations as prompted by the app.
Factory reset
Restoring factory settings will clear all user data from the scale, including the Wi-Fi network.
Data that is not synchronized to the app before the factory reset will be lost, but those already
synchronized to the app will not be affected. To restore factory settings, perform the following
steps:
1. Step on the scale gently to light up the screen. Place your phone close to the scale, launch the
app, and ensure that the app has been connected to the scale.
2. Select Profile > My devices > Amazfit Smart Scale.
3. Tap Factory Reset, and complete factory reset as prompted by the app.
Limits
The maximum weight supported by the scale is 180 kg. If the measurement value exceeds 180 kg,
the following screen is displayed:
To Next Page
Loading...
Need help?
General