Amazfit Smart Scale User Manual

3
Pairing the Amazfit Smart Scale with your phone
Installing the Zepp app
Search for "Zepp" in the app store, and then download and install the Zepp app (hereinafter
referred to as the app).
Note:
1. For a better experience, upgrade the app to the latest version as prompted.
2. The operating system of your mobile phone must be Android 5.0 or iOS 10.0, or higher.
Pairing the Amazfit Smart Scale with your phone
Launch the app, register an account, log in to the account, and select Profile > My devices >
Add > Body Composition Scale to pair the Amazfit Smart Scale with your phone. After pairing,
configure the user information so that you can view your weight records and body composition
information.
Note:
1. User information is used for body composition analysis. You need to enter the correct
information to ensure correct analysis results.
Configuring a Wi-Fi network for the scale
After initial pairing, configure a Wi-Fi network for the scale as prompted by the app. After
successful configuration, the scale can automatically update firmware at night, and the app can
receive body data from the scale at any time without being connected to the scale in real-time.
Note:
1） The scale can only connect to a 2.4G Wi-Fi network, but not to a 5G Wi-Fi network.

Amazfit Smart Scale Specifications

General

Weight Capacity	180 kg / 396 lbs
Connectivity	Bluetooth 5.0
Power Source	4 x AAA batteries
Weight Range	5 kg - 180 kg
Weight Increments	0.1 kg / 0.2 lbs
Body Composition Measurements	Weight, Body Fat, Muscle Mass, Bone Mass, Water Percentage, Protein, Visceral Fat
Metrics Measured	Weight, BMI, Body Fat, Muscle Mass, Bone Mass, Water Percentage, Protein, Visceral Fat
Compatibility	Android and iOS
Dimensions	320 x 320 x 25 mm
Display	LED Display
User Profiles	Up to 10 users