AMAZON COMMERCIAL B07VX41MPR - Duty Cycle, Continuity, and Diode Tests

24
EN
Duty cycle measurement
• Insert the black connector lead (S) into the
negative COM (black) terminal (I) and the red
connector lead(S) into the positive V (red)
terminal (M).
• Set the function switch (K) to the / Hz / %
position.
• Press the MODE/VFD button (H) to shift to
measuring the duty cycle % (in percent).
• Connect the test probes (S) across the circuit
or component being measured.
• The stabilized value on the display (F) is read as
the actual reading.
Continuity measurement
• Insert the black connector lead (S) into the
negative COM (black) terminal (I) and the red
connector lead(S) into the positive V (red)
terminal (M).
• Set the function switch (K) to the /
position. The indicator(12) appears.