9
EN
Intended Use
• This product is intended to perform electrical
measurements on CAT III locations (3-phase
and single phase distribution) and CAT II
locations (single-phase household appliances
and tools).
• This product is for indoor use only.
• This product may be used only under the
conditions and for the purposes for which it
was designed.
• No liability will be accepted for damages
resulting from improper use or non-compliance
with these instructions.
Before First Use
• Check the product for transport damages.
• Remove all the packing materials.
DANGER
Risk of suffocation! Keep any
packaging materials away from children – these
materials are a potential source of danger,
e.g. suffocation.
To Next Page
Loading...