Cleaning and Maintenance
A WARNING
Risk of electric shock! To prevent electric shock, unplug before cleaning.
A WARNING
Risk of electric shock! During cleaning do not immerse the electrical parts of
the product in water or other liquids. Never hold the base under running water.
A WARNING
Risk of burns! The kettle is hot during and after operation. Allow the kettle to
cool down before touching. Always use the handle to move the kettle.
• To clean, wipe with a soft, slightly moist cloth.
Dry the product after cleaning.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to
clean the product.
nside the spout (B) there ISa fi ter (A) It reta ns lime deposits and coarse impurities. If the filter
is dirty, remove Itand rinse it with clear water.
To loosen the filter: Carefully push the clip of the filter on the inside towards the center.
To replace the filter: Push it into the opening until the clip locks.
Descaling
• Fill the product to the MAX mark with a 5 15 % vinegar solution.
• Switch on the product. Let the solution reach boiling temperature.
• Wait until the limescale has dissolved.
• Pour the solution into the drain.
• Rinse the product thoroughly with clear water.
Specifications
Voltage/frequency:
Power consumption:
Capacity:
Dimensions ONx H x D):
120 V-, 60 Hz
500 w
6.2 x 9.4 x 8.7 in
approx.
approx. 2.5 lbs (kettle only)
3
7
To Next Page
Loading...