Need help?Do you have a question about the Amazon eero 6 and is the answer not in the manual?
General| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
|---|---|
| Speed | Up to 900 Mbps |
| Memory | 512 MB RAM |
| Storage | 4 GB flash storage |
| Antennas | Internal antennas |
| Operating Temperature | 32°F to 95°F (0°C to 35°C) |
| Bands | Dual-band |
| Coverage | Up to 1, 500 sq. ft. |
| Ports | 2 x Gigabit Ethernet ports |
| Processor | Quad-core 1.2 GHz |
| Security | WPA3 |
| Smart Home Connectivity | Zigbee |
| Operating Humidity | 20% to 80% |
| Dimensions | 3.9 x 3.8 x 2.6 in (99.4 x 97 x 65 mm) |
Download the eero app from Google Play or Apple Store and open it to begin setup.
Confirm you have the Gateway eero Device, Ethernet Cord, Power Cord, and Modem.
Unplug old modem/router, connect eero to modem/NTD via Ethernet, then plug eero into power.
Wait for the eero application to find and configure your eero device.
Specify your desired Wi-Fi network name and password for connectivity.
Wait for the eero network to connect to Wi-Fi and choose to finish or add more devices.
Select 'Add another eero device' if you have more devices to set up.
Review app suggestions for optimal placement to maximize Wi-Fi performance.
Plug additional eero devices into a power outlet and wait for them to connect.
Select the location of the additional eero device within the application.
Repeat setup for more devices or select 'Finish Setup' to complete the process.
To Next Page