Amazon FIRE TABLET User Manual

Guide to VoiceView Screen Reader for
Fire Tablet
The VoiceView screen reader lets you use gestures to
navigate your Fire tablet (FireOS 5 and higher) and interact
with content with speech output."
This document contains information about how to turn on
VoiceView, basic usage, settings, and gestures."
Enable VoiceView
To enable VoiceView during first-time setup:"
1. Press the power button located next to the USB power
port."
2. Wait for the device to load the language selection
screen."
3. Triple press the power button, and wait for VoiceView
to start."
You can also enable VoiceView any time:"
1. Press and hold the power button until you hear an alert
sound."
2. Hold two fingers slightly apart on the screen for five
seconds to enable VoiceView."
Page 48

Amazon FIRE TABLET Specifications

General

Display Type	IPS LCD
Operating System	Fire OS
Display Size	7 inch, 8 inch, or 10.1 inch (depending on the model)
Display Resolution	1024 x 600 pixels (varies by model)
Processor	Quad-core (varies by model)
RAM	1GB or 2GB (varies by model)
Internal Storage	16GB or 32GB (varies by model)
Expandable Storage	Up to 512GB via microSD (varies by model)
Rear Camera	2MP or 5MP (varies by model)
Front Camera	VGA or 2MP (varies by model)
Wi-Fi	802.11 a/b/g/n/ac (varies by model)
Bluetooth	Yes (varies by model)
Battery Life	Up to 7 hours (varies by model)
Weight	Varies by model
Dimensions	192 x 115 x 9.6 mm (varies by model)