11
English Français Deutsche Italiano Español
English.............................2
Français...........................9
Deutsch...........................1 6
Italiano...........................23
Español...........................30
日本語.......................... ....37
中文.................................44
Deutsche
日本語中文
FrançiasEnglish Italiano Español
5. Fasten the two supplied screws to the back of the Sound Bar.
1/4
(5mm)
6. The screw head should extend out at
least 1/4” (5mm) from the back of the
Sound Bar.
7. To hang the Sound Bar on the mounting brackets, fit the screw heads into
the mounting bracket slots and slide the Sound Bar down to secure it.
To Next Page
Loading...