13
Operating the tilt lockout
To let your chair tilt back, pull the control handle out.
To stop your chair from tilting, sit forward, then push the control handle in.
Safety and Compliance
• Use care when handling.
• Please read the instructions completely before assembly.
• Remove all parts from the carton and ensure all parts are included prior to assembly.
• Assemble the chair on the carton or carpet to prevent scratching the chair.
• Be careful not to cross-thread bolts.
• Do not use power tools.
Specifications
Dimensions (H x W x D) 41.73-45.47 x 29.13 x 26.18 inches
(106 - 115.5 x 74 x 66.5cm)
Maximum load weight 225 lbs. (102.1 kg)
Control
handle
ATTENTION: ALL REPAIR WORK OR EXCHANGE FOR THE HEIGHT ADJUSTABLE GAS LIFT MUST BE
DONE BY SPECIALISTS.
To Next Page
Loading...
