10
Operation
CAUTION
Risk of burns! The heater is hot when in use. To avoid burns, do not
let bare skin touch hot surfaces.
NOTICE
The power indicator stays on as long as the power plug is connected
to the power source.
Set the power knob to the desired setting:
The heater is off.
Ventilation only. No heating.
Heating mode - Low volume
Heating mode - High volume (1500 Watts).
Max Temperature
Min Temperature
NOTICE
Overheating protection. The product will automatically shut-off when it
overheats. Unplug the product from the power source and let it cool for at
least 30 minutes.
Thermostat control
• Set the power knob to the or setting.
• Set the desired temperature using the thermostat knob.
• The heater will now start operating. It will reach and then maintain the pre-set temperature.
NOTICE
It is normal for the heater to cycle on and off to maintain the preset
temperature. To prevent the heater from doing so, increase the
temperature with the thermostat knob.
B074MWKSLX-AmazonBasics-Ceramic Heater-IM-05 (US).indb 10 9/21/17 9:53 AM
To Next Page
Loading...
Need help?
General
