6
EN
User Servicing Instructions
Fuse replacement
NOTICE
The product requires a 5A, 125V fuse.
• Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
pulling on cord.
• Slide open fuse access cover on top of
attachment plug towards blades.
• Remove fuse carefully by using a small
screwdriver to pry the fuse out of the
compartment by the metal ends of
thefuse.
• Risk of fire. Replace only with 5 A, 125 Volt fuse.
• Slide closed the fuse access cover on top of the attachment plug.
Cleaning and Maintenance
WARNING
Risk of electric shock! To prevent electric shock,
unplug the product before cleaning.
WARNING
Risk of electric shock! During cleaning do not
immerse the product in water or other liquids. Never hold the product
under running water.
Cleaning
• To clean the product, wipe with a soft, slightly moist cloth.
• Dry the product after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers,
metal or sharp utensils to clean the product.
Storage
• Store the product in its original packaging in a dry area. Keep away
from children and pets.
Maintenance
• Any other servicing than mentioned in this manual should be performed
by a professional repair centre.
Fuse cover
Fuse
To Next Page
Loading...