EN
14
8.1.2 Cleaning the dust container lter
NOTICE It is recommended to clean the foam lter (15) when it is visibly dirty. It
may require more frequent cleaning if vacuuming ne dust.
1. Lift the dust container lter lid (Fig. 14).
14
2. Pull the foam lter (15) from the lid (Fig. 15).
15
15
3. Rinse the foam lter (15) with warm water to wash away dust buildup and residue.
4. Allow at least 24 hours for the foam lter (15) to dry completely.
5. Place the foam lter (15) back into the dust container lter lid.
8.1.3 Cleaning the cyclone (cyclone lter and inlet cup)
NOTICE It is recommended to clean the cyclone lter (16) when it is visibly dirty or
clogged. It may require more frequent cleaning if vacuuming ne dust.
1. Lift the dust container lter lid (Fig. 13).
To Next Page
Loading...
