EN
15
2. Squeeze the tabs to pull the cyclone from the dust container (11) (Fig. 16).
16
1
2
11
3. Twist the inlet cup (17) to separate it from the cyclone lter (16) (Fig. 17).
17
1
2
16
17
4. Remove dirt and debris from the cyclone lter (16) and inlet cup (17). Rinse if
necessary.
5. After rinsing, let the cyclone lter (16) and inlet cup (17) dry completely.
6. Realign the cyclone lter (16) with the inlet cup (17). Twist to lock.
7. Ret the cyclone into the dust container (11). Align the cyclone with the lip of the
dust container (11) then push down.