English.............................2
Français...........................9
Deutsch...........................1 6
Italiano...........................23
Español...........................30
日本語........................... ...37
中文.................................44
Deutsche
日本語中文
FrançiasEnglish Italiano Español
Operating Instructions
10. Hot shoe stand
The hot shoe stand has a 1/4” socket on the bottom for mounting the stand
on a studio light stand or tripod.
9. Power saving function (cont.)
n In S1 and S2 MODE, the Electronic Flash will idle for 40 minutes and
then will enter auto sleep mode. To restart the Electronic Flash, press
the TEST button or activate the camera.
WARNING: During continuous flash shooting, the batteries may generate
heat and cause injury. Read Safety Instructions carefully before using
Battery protection - When the response time is more than 30 seconds, the
flash will stop charging. If the power indicator light flashes alternating red and
green with 0.5 second intervals, then replace the four batteries.
MAXIMUM NUMBER OF CONSECUTIVE FLASHES
LIGHT INTENSITY LIMIT COUNT PER HOUR
1/1, 1/2 100
1/4, 1/8 200
1/16, 1/32 320
1/64, 1/128 480
11. Protection function
To prevent overheating, please note the maximum number of consecutive
flashes. Wait at least 10 minutes for the Electronic Flash to cool down.
To Next Page
Loading...
Need help?
General