Need help?Do you have a question about the Amazone AMADOS and is the answer not in the manual?
General safety guidelines for operation, maintenance, and electrical work.
Specific setup tips for using AMADOS with specific tractor interfaces.
Step-by-step guide for operating the AMADOS with centrifugal broadcasters.
Steps for calibrating the fertilizer application rate.
Detailed steps to perform the fertilizer calibration test.
How to continue operation if electrical faults occur.
Process for calibrating the distance sensor for seed drills.
Calibrating the sensor by driving a set distance.
Setting the desired seed rate for the drill.
Performing the calibration test for seed rate accuracy.
Setting up the pattern for tramlines on the seed drill.
List of error codes and remedies specific to seed drill operation.
Comprehensive table of faults, causes, and remedies for seed drills.
Keypad usage guide applicable to hectare meter operations.
Process for calibrating the distance sensor for hectare meter.
Mounting the Sensor 'X' for speed and distance measurement.
Mounting the Sensor 'Y' to detect the operational position.
Mounting the Sensor 'A' for monitoring shaft speed.
To Next Page
General
