Version 1.2 ©Copyright 2018, Ambient LLC. All Rights Reserved. Page 1
EZ-NPP Weather Station Mounting Tripod and Mast with
Platform User Manual
Table of Contents
1. Introduction ..................................................................................................................................... 1
2. Parts................................................................................................................................................. 2
3. Warnings ......................................................................................................................................... 2
4. Recommended Tools and Materials ................................................................................................ 2
5. Installation ....................................................................................................................................... 3
5.1 Platform .................................................................................................................................. 3
5.2 Tripod ..................................................................................................................................... 4
5.3 Mast ........................................................................................................................................ 5
5.4 Ballast ..................................................................................................................................... 6
6. Optional Mounting Equipment ....................................................................................................... 6
EZ-125-35M 35” Mast Extension (Optional) ..................................................................................... 6
7. Warranty Information ...................................................................................................................... 7
1. Introduction
Avoid drilling lag screws into your flat roof top or concrete pad, the EZ-NPP is
recommended for high wind installations, providing a strong platform with cinder blocks
for ballast (cinder blocks are not included).
Ideal for non-penetrating flat roof and ground installations, the EZ-NPP tripod and mast
assembly includes a sturdy, galvonized steel mounting platform. The platform is sized for
four standard concrete cinder blocks as ballast.
The EZ-NPP Tripod assembly is constructed of 18 gauge 1008-10 steel tubing, galvanized
using the Flo-Coat (zinc-chromate-polymer) process for excellent corrosion protection.
Ungalvanized mast collars, & connecting components are gold irridited for corrosion
protection.
Mast collars feature a captive "stop-nut" design, to eliminate lock nut spin when tightened;
and a mast supporting cup for additional stability.
Tripod height 33 inches (85.8 cm). Supplied with one mast for an assembly height of 53"
inches (150.8 cm).
Add up to two mast extensions (EZ-125-35M) to extend the height of 31" per mast
extension.
To Next Page
Need help?
General
