J
Julie StevensAug 6, 2025
How to reset Ambient Weather WS-8400?
- SsharonjohnsonAug 6, 2025
If your Ambient Weather Alarm Clock isn't responding to commands, press the reset button on the back of the clock using a paper clip or similar tool.
To Next PageTo Next PageHow to reset Ambient Weather WS-8400?
If your Ambient Weather Alarm Clock isn't responding to commands, press the reset button on the back of the clock using a paper clip or similar tool.
What to do if Ambient Weather Alarm Clock sensor lost connection?
If your Ambient Weather Alarm Clock's wireless sensor isn't communicating, syncing, or is intermittent, try these steps: * Ensure the sensor is powered on and the LED flashes about once a minute. Use lithium batteries in cold environments. Replace the batteries if the transmitter isn't flashing. * Move the sensor closer to the clock, ensuring it's within the 150’ range. * If the sensor is too close (less than 5-10’), move it further away. * Ensure the sensor isn't transmitting through metal or earth barriers. * Move the clock away from devices that generate electrical noise. * Try placing the remote sensor in a higher location. * Also, RF sensors cannot transmit through metal barriers or thick walls.
Why Ambient Weather WS-8400 Alarm Clock barometer reads Lo?
If the barometer on your Ambient Weather Alarm Clock reads 'Lo', check your local altitude. This product is designed to operate at altitudes less than 4,000 feet.
How to fix a fuzzy projection on Ambient Weather WS-8400 Alarm Clock?
If the projection on your Ambient Weather Alarm Clock is fuzzy, adjust the focus setting.
What to do if Ambient Weather WS-8400 Alarm Clock is dim on battery?
If your Ambient Weather Alarm Clock is dim when running on batteries, press the snooze/light button or connect it to AC power.
General| Display Type | LCD |
|---|---|
| Time Format | 12/24 Hour |
| Snooze Function | Yes |
| Power Source | AC Adapter |
| Battery Backup | Yes |
Crucial safety advice regarding projector use and power adapters.
Overview of the clock's key features and components.
Lists all components included with the WS-8400 clock.
Step-by-step guide for initial setup and powering the device.
Guidance on optimal placement for the outdoor temperature sensor.
Explanation of the standard time display interface and its elements.
Details on how the alarm time is presented on the display.
Procedures for configuring the clock's time, date, and language preferences.
How to set and manage alarm times and snooze functions.
Instructions for using the projector and adjusting backlight brightness and rotation.
How to manage barometric pressure units, calibration, and understanding pressure readings.
Explanation of the barograph feature for weather prediction.
How to view stored minimum and maximum temperature and pressure values.
Accessing and viewing hourly historical weather data.
Options for manual color preference and automatic color based on outdoor temperature.
How the device alerts for low outdoor temperatures.
Turning the backlight on/off and adjusting its brightness levels.
Understanding the display of wireless sensor data and indicators.
Identifying when the wireless sensor batteries need replacement.
How to switch between and automatically scroll through sensor channels.
Procedures for re-establishing communication with the wireless sensor.
Steps for integrating additional wireless sensors into the system.
Technical details on wireless transmission range, frequency, and update rate.
Range, accuracy, and resolution for indoor temp, outdoor temp, and barometer.
Information on battery and adapter power requirements for the display.
Addresses common problems like sensor sync issues and projection fuzziness.
Lists optional accessories, such as additional wireless sensors.
Disclaimer regarding product usage, environmental responsibility, and accuracy.
Details regarding FCC rules, interference, and user modifications.
Explains the terms and conditions of the product's limited warranty.
