14
Using Flurry
Alarm
Your device is equipped with two independent alarms, which are
controlled by the dimpled orange and white buttons located on the
top face of the clock. Alarm 1 corresponds to the orange and white
button on the left, and Alarm 2 corresponds to the orange and
white button on the right. An alarm is turned on when its button
is in the ‘up’ position. An alarm is disengaged if its button is in the
‘down’ position. If both of the orange and white buttons are in the
‘up’ position, both alarms are engaged.
When either of the alarms is turned on, the time at which it is set
will be displayed on the screen. When an alarm is turned off, the
alarm’s clock display will show only dashes.
Using your Flurry Alarm Clock
To Next Page