15
Using Flurry
setting alarm time
Set the time for your alarms using the Alarm +/- buttons. Hold
down the Alarm +/- button in the desired direction to scroll quickly
through the hours, or tap the button to scroll through minutes. An
alarm’s time can be set whether the alarm is on or off. Unless you
select a new alarm time, each alarm automatically uses the last set
time when it is turned on.
snooze function
When your alarm is ringing, use the Snooze/Brightness bar on the
top face of the Flurry to give yourself a few extra minutes of sleep.
Flurry’s default snooze length is 9 minutes – this length of time can be
changed using the Settings menu (see page 19). The Snooze bar will
To Next Page
Loading...