16
Using Flurry
never disengage the alarm; to stop the alarm after it has rung, press
the round white button so that it is in the ‘down’ position.
When the alarm is not ringing, the Snooze/Brightness button allows
you to change the brightness level of the device’s screen.
using two alarms
If both Alarm 1 and Alarm 2 are engaged, they will operate inde-
pendently. For example, if Alarm 1 is set to an earlier time than
Alarm 2, pressing the Snooze button after Alarm 1 rings will not
affect Alarm 2. To disengage only one of the alarms, simply set its
white button to the ‘down’ position.
To Next Page
Loading...