17
Using Flurry
Weather Forecaster
receiving your first update
Your Flurry Alarm Clock receives weather updates wirelessly via the
Ambient Information Network. Once your device has been plugged
in, check the signal strength indicator on the top right of the screen.
If your Alarm Clock is getting reception, you will see one, two, or
three ascending bars next to the word ‘ambient’ on the screen. To
ensure that the device receives updates as frequently as it should,
place the Flurry Alarm Clock in a location where it displays at least
two bars indicating signal strength.
After your device has been powered on, sit back and relax! Your
Flurry Alarm Clock will automatically begin listening for a signal.
Please note that it could take up to four hours for weather data to
To Next Page
Loading...