Ambiente 3 Tier Classic Stone Fountain User Manual

For more information:
Web: www.ambientewaterfeatures.co.uk
Address: Ambienté – Fynzi Limited, 173 Curie Avenue, Didcot, OX11 0QG
Phone number: UK: 0800 161 3832 Int: +44 (0)2087 785 612
Email: info@ambientewaterfeatures.com
Classical Stone Fountain – 2 & 3 Tier
Installation
Instruction
Fountain Safe should be used all year round. This will help to reduce
maintenance and to maintain the lustre of your feature by
slowing or stopping the build up of algae etc.
Frost Free should be added to the feature as the colder
months draw in. It lowers the freezing point of water
helping to prevent frost damage. If water freezes in a
fountain, it will expand and crack the feature.
All water features should be drained, dried and covered before severe
frost or snow.
For pumps to function properly, they need to be completely free of air bubbles.
Whilst submerged, a gentle shake or tap should be sufcient to dislodge any
such bubbles.
If excessive noise is coming from the pump this could be due to either trapped air
or the pump rattling against the sides of the reservoir. Please ensure the pump is
“suckered” to the base of the reservoir by the rubber feet.
Ambienté recommends
Congratulations on your purchase!
We sincerely hope you are satised with your new product.
Pull off lter
cover as shown
Remove lter (if
present) and rinse
in water
Open impeller
cover, then
impeller can easily
be removed
Rinse all parts
carefully and
thoroughly
For regular pump maintenance
1
2
3
4
F0276
Here are a few points to help you prolong the life of your feature.

Ambiente 3 Tier Classic Stone Fountain Specifications

General

Brand	Ambiente
Model	3 Tier Classic Stone Fountain
Category	Outdoor Fountain
Language	English

Summary

Ambienté Recommends

Fountain Safe

Product for reducing algae and maintaining feature lustre year-round.

Frost Free Additive

Additive to prevent frost damage to features in cold weather.

Winter Storage Precautions

Drain, dry, and cover features before severe frost or snow.

Pump Air Bubble Removal

Ensure pumps are free of air bubbles for proper function by gentle shaking.

Pump Noise Troubleshooting

Address pump noise by securing it to the reservoir base with rubber feet.

Regular Pump Maintenance Steps

Steps for regular pump maintenance: filter removal, cleaning, and impeller access.

Installation Guide

Pre-Assembly Professional Advice

Seek advice from builders and electricians before starting feature assembly.

Foundation and Levelling

Construct a foundation if needed and ensure the base is level using wedges.

Tubing and Cable Installation

Feed tubing through bowls and pedestals, and pump cable to the base.

Final Sealing and Filling

Seal all rubber bungs and fill bowls with water, ensuring pump submersion.

Pump Operation Critical Warning

Critical warning: Do not allow the water-cooled pump to run dry to prevent damage.

Maintenance and Cleaning

Instructions for maintaining and cleaning the fountain in various weather conditions.