INDEX Section
General information ------------------------------------------------------------1
Tools and parts requirement -------------------------------------------------2
Step by step instruction ------------------------------------------------------- 3
SMARTCOM LCD SCREEN
RECOVERY PROCEDURE.
Technical Bulletin No.14
WARNINGS
All installations should be in accordance with the relevant requirements of
Building Regulations, Local Authority Byelaws and I.E.E. Regulations and
Units should be wired by a competent, qualified Electrician.
Under normal operating conditions, when
mains power to the controller is interrupted, the
clock will operate normally for seven days after
which it will stop. The built-in battery will con-
tinue to back up the program information for the
life duration of the cell. If, however the battery is
removed and allowed to power down, all user
programming will be removed and replaced by a
manufactures default setting.
General information.
SmartCom
2
2
2
To Next Page
