AMBROGIO L15 Deluxe User Manual (English)

Other manuals for AMBROGIO L15 Deluxe

Questions and Answers:

D
Dr. Carolyn MurphyJul 28, 2025
Why is my AMBROGIO L15 Deluxe Lawn Mower vibrating and noisy?
- R
  Randy FlemingJul 28, 2025
  If your AMBROGIO Lawn Mower is vibrating abnormally or is very noisy, several factors could be at play. First, inspect the cutting blade for any damage and replace it if necessary. Also, check if the blade is clogged with debris like tape, cords, or plastic; if so, safely stop the robot and carefully remove the obstructions, wearing protective gloves. Another cause might be that the robot encountered obstacles such as fallen branches or forgotten objects when it started. Stop the robot safely, clear the area, and then restart it. If the issue persists, it could be due to an electric motor failure, in which case you should have it repaired or replaced by an authorized service center. Finally, if the grass is too high, try increasing the cutting height.
O
oosborneAug 6, 2025
What to do if AMBROGIO Lawn Mower doesn't position correctly in charging station?
- S
  Stephanie WrightAug 6, 2025
  If your AMBROGIO Lawn Mower isn't positioning itself correctly inside the charging station, it could be due to a couple of reasons. First, check the positioning and connection of the perimeter wire or the power cord of the charging station. Second, ensure that the charging station is placed on a flat and stable surface, as collapsing ground next to it can cause issues.
G
Gary HawkinsAug 16, 2025
How to fix AMBROGIO Lawn Mower when it doesn't behave correctly around flowerbeds?
- S
  svegaAug 16, 2025
  If your AMBROGIO Lawn Mower is not behaving correctly around flowerbeds, the perimeter wire may be laid incorrectly. Reposition the perimeter wire correctly in a counter-clockwise direction.

AMBROGIO L15 Deluxe Specifications

General

Type	Robotic lawn mower
Motor type	Brushless
Cutting width	150 mm
Grass catcher	-
Product color	Black, Green
Maximum lawn area	600 m²
Sound power level	57 dB
Maximum cutting height	70 mm
Minimum cutting height	20 mm
Suitable for slope up to	45 %
Cutting clearance adjustment	Yes
International Protection (IP) code	IPX4
Battery type	Built-in battery
Power source	Battery
Battery capacity	2.5 Ah